|Group||Injector Cleaner & Tester|
|Min. Order||1 set|
|Terms of Payment||L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal|
|Product name||FIC-601 injector cleaner & tester|
Fuel Injector Cleaner Machine Car Injector Cleaner Gas Fuel Injector Cleaner
The operation of the injectors plays a fundamental role in the power of each engine. Due to poor fuel, the injector does not work well, causing serious carbon accumulation in the cylinder; the cylinder and piston ring accelerate wear, resulting in unstable idle speed, increased fuel consumption, accelerated acceleration, difficulty in starting and excessive discharge, and severely blocked the spray. The nozzle is damaged by the engine. Therefore, it is necessary to clean the injector regularly, and if it is not cleaned for a long time or the nozzle is frequently cleaned, it will have a bad influence.
Injector cleaner and tester machine
Ambient temperature range
1) Remove the injector from the vehicle engine to check the o-rings inside for damage. Replace the damaged 0-ring with another same type 0-ring to avoid leakage during testing. Put the outside of injectors in gasoline or detergent, and wipe them with soft cloth after cleaning the outside oil sludge carefully.
2)Check the liquid level and refill test liquid when necessary. Fil1 the test liquid through the filler on the side of the unit and observe the liquid level in the fuel level viewer. In most cases, filled the liquid up to1/2 of the tank capacity.
3) Turn on the power switch on the right of the Cabinet.
4)Fill ultrasonic detergent into the ultrasonic cleaning launder so that the needle valve of the injector is covered by the detergent.
5) Connect the injectors with the right couplers.
Note:Test liquid and detergent are provided by user self. The test liquid is used for uniformity/sprayability test, leakage test, injecting flow test and Automatic Test. The mixture of fuel and detergent is used in on-vehicle cleaning. The ultrasonic cleaning uses special injector detergent.
1. Provide product information
2. Product operation guide
3. Logistics monitoring
4. 1 year maintenance guarantee
1. Free maintenance
2. Provide technical support
3. Free marketing support
4. Free training
5. Free OEM
1. Liquid return tube 2. Pulsesignal tube 3. Fuelintake
4. Operation panel 5.Ultrasonic cleaning machine 6. Window tube
1. What are the main features of this product?
Ultrasonic cleaning technology, strong cleaning ability
Microcomputer pressure control technology, stable oil pressure, wide adjustable range
Fully automatic control of cleaning detection process
2. What are the main functions?
Uniformity/atomization detection function
Sealing detection function
Automatic cleaning detection
Free cleaning function
3. What is the machine operating mode function?
Check injector seal and spray performance as well as ultrasonic cleaning.
4. How long does it take to clean the inspection process?
The whole process lasts about 20 minutes.
5. Which models are suitable for?
Suitable for all petrol vehicles
6. Are there any special requirements for the working environment?
Open fire is strictly prohibited within two meters of the working environment
7. Check the benefits after cleaning?
By detecting cleaning, it can prevent the nozzle from clogging and reduce the damage to the injector.Make the injection more smooth
8. The benefits of using a nozzle machine.
It can realistically simulate the fuel injection process running inside the car, and the naked eye can observe the contrast.